ThinkCar Thinkscan 689BT Bi-Directional Bluetooth Scanner with ECU Coding (FREE Updates for life)

1. ABS Bleeding: Help exhaust the air.
2. AdBlue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
3. Adaptive Front Lighting (AFS Headlamp Reset): Initialize the adaptive headlamp system.
4. Air / Fuel reset: Set or learn Air/Fuel ratio parameters.
5. Air Suspension Level Calibration: adjust vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
6. Airbag Reset: Resets the airbag data to clear the airbag collision fault indicator.
7. Battery Matching(BMS): reset the monitoring unit of the car battery after replacing the battery or battery monitoring sensors.
8. Brake reset (EPB) reset the brake pad after replacing the brake pad, the servo motor, etc., deactivate/activate the brake control system, assist with brake fluid control, open and close brake pads, etc.
9. Clutch Matching
10. Codage ECU: Required for some online coding of electronic modules on VAG vehicles
11. Coolant Bleed: Activate the electronic water pump.
12. CKP(Crank Position) Sensor Adaptive Learning
13. DPF Regen: Clear particulate matter from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance.
14. EGR Adaption: This function is used to learn the EGR (Exhaust Gas Recirculation ) valve after it is cleaned or replaced.
15. Electric Throttle Relearn: Initialize and reset the throttle actuator and reset ECU to the initial factory state.
16 FRM Matching: Reset Footwell Module on BMW
17. Gateway Module Data Calibration
18. Gearbox Relearn: Monitors certain camshaft position sensors signals.
19. Immo Reset: Disable lost vehicle keys and program replacement key fob. ONLY For some Asian and American cars with low-grade IMMO.
20. Injector Coding: Write the actual code of the fuel injection nozzle to the ecu after replacing the ECU and the fuel injector, to accurately control or correct the fuel injection amount of each cylinder.
21. Language Change
22. NOx Sensor Reset: Reset catalytic converter learned value stored in ECU.
23. ODO Meter: Copy, write or rewrite the kilometer value, only few cars compatible, check with seller compatibility.
24. Oil Maintenance reset: Reset the oil life system and turn off the oil light after oil or oil filter replacements.
25. Rainfall Light Sensor Reset: The rain sensor in a vehicle detects rainfall and adjusts the automatic wiper frequency.
26. Seat Occupancy Calibration: Designed for the seats with memory functions. Match the seat after repairing or replacing the seat.
27. Steering angle reset: calibrate the steering angle after replacing steering-related parts.
28. Stop/Start Reset: Set up the automatic start-stop function in ECU.
29. Sunroof Reset: Initialize the sunroof data to set the sunroof to lock off, close in rain, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
30. TPMS Reset Database: reset the tire pressure and turn off the tire pressure fault indicator.
31. Tire Reset: Set the size parameters of the modified or replaced tire.
32. Transport Mode: Deactivate the transport mode.
33. Turbo Matching: Perform adaptation to match new turbocharger (only required for certain brands)
34. Windows Calibration: Perform door window matching to recover ECU initial memory.

Attention !!! NOT ALL Reset Service work for All Car Models.

SUPPORTS DOIP PROTOCOL

With Diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN. That makes689BT save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).

Support Auto Auth for FCA SGW Access
The vehicles with security gateways are mainly the following vehicles: Chrysler series, Maserati series, Fiat series, Renault series, Nissan series, Mercedes-Benz series, Volkswagen series.

Without unlocking the security gateway, you can only read fault codes, read data streams, and read version information. You cannot clear fault codes, and there are no special functions, etc. After unlock FCA also supports special functions such as action testing, maintenance reset, key matching, etc.

Use Chrysler 12+8 adapter to Unlock Gateway for Vehicle brands below:

2018 and later Chrysler: 300, Grand Voyager

Dodge: Challenger, Charger, Durango, Journey, Ram 1500, Ram 2500, Ram 3500, Ram 4500, Ram 5500

JEEP: Grand Cherokee, Renegade, New Wrangler (JL), Grand Commander

2019 and laterJEEP: Cherokee, Compass

2020 and laterJEEP: Gladiator

2018 and laterAlfa Romeo: GIULIA

Fiat: 500L, 500X, 500, Novo Uno fl, Toro

2018 and laterMaserati series

Note: 12+8 menu prompts, there are no English prompts, only the entrance to log in to FCA in English.

Nissan Series

B18 chassis Nissan models (14th generation Nissan Sylphy, Sentra)

Currently, you need to use Nissan 16+32 adapter cable to release the security gateway module.

Mercedes-Benz W206 W223 chassis vehiclesC series/S series models after 2020

There is no need to purchase an account or any physical method. The main thing is software authorization, and the main thing is that the equipment hardware needs to support the DOIP protocol. The DOIP protocol requires the manufacturer’s authorization, but it is not enabled on the English version of the software. Without authorization, if customers want to diagnose these models, they must switch to other languages for diagnosis. Japanese, Korean, Traditional Chinese, and Simplified Chinese are all acceptable.

Volkswagen Series

2020~2023 Golf 8

2021~2023 Land Cruiser

2021~2023 Land Cruiser

2022~2023 Lingdu L

2022~2023 New Weiran

ID.4 CROZZ, ID.6 CROZZ

ID.3, ID.4X, ID.6X

Audi Series

2020~2023 Audi A3L

Q2 e-tron, Q4 e-tron, Q5 e-tron

Skoda Series

2021~2023 Octavia PRO

The above models are equipped with Volkswagen SFD security gateway module, which needs to be unlocked for diagnosis. The diagnostic software has a login entrance. If the customer has a token code, it can be unlocked.

Renault/Dacia Gateway Unlock

The online gateway function of Renault models is similar to that of FCA. They are both online security gateways. If they are not unlocked, only read operations (reading fault codes, data streams, version information, etc.) can be performed, and write operations (clearing codes, setting codes, programming, etc.) cannot be performed. Renault online gateway unlocking is to temporarily unlock the vehicle using the software provided by the Renault original factory. After unlocking, the fault diagnostic instrument can be used on the Renault car to perform write operations: such as action testing, programming, setting codes, anti-theft and initialization functions.

If you need Renault/Dacia Gateway Unlock Function:

Please contact our online customer service about purchasing T-CODE in exchange for the corresponding unlocking license.